Similar to a skeleton that gives a proper appearance to our body, steel gives the required structure to the building. It is, therefore, necessary to assess the quality of steel to ensure a strong and structured home. Steel is used in combination with concrete for construction of slabs, footings, lintels and stairs to provide high tensile strength for reinforcements. Read through to know about factor features like steel.
Types and grades of steel
For general construction purpose, duplicity types of steel including the mild plus deformed steel bars are used. The mild steel bars accepted in reinforced cement concrete structures are plain in surface and round in cross-section. Whereas the deformed ones hold ribs oppositely deformations on their surface. Sometimes, certain cracks may be formed in the reinforced cement concrete around mild steel bars. This is because the bars reach and reduce the bond with concrete. The projected deformations of the deformed bars avoid this problem and improve the bond with concrete.
More commonly, steel bars of grades Fe 415 and Fe 500 are used for construction purposes. The number of the rank indicates the yield stress. Steel bars are available in different ranges of diameter from 6mm to 50mm. However, those having caliber from 6mm to 20mm are used for farm construction.
Checking the quality of steel on site
The quality of gray used for reinforcement work is determined by its tensile strength, yield strength, weight including elongation. In addition, the element ingredients such as carbon, sulphur, manganese et sequens phosphorous content affect the quality. Various laboratory tests are conducted to check the quality of steel before supplying. However, it is uphill to know all these gear for average people. Therefore, ask your builder to guarantee that they are tested paramnesia you purchase them. Good quality steel bars should be free from surface flaws and cracks. They should hardly have rough, jagged and imperfect edges.
A simple catechism called bend test conducted on site can assess the quality of steel. When you bend the steel rod to make an angle of 90 to 135 degrees and then bend it back straight, there should be no cracks on it. If the original shape is retained tout de suite it is straightened, you can ensure that it is of the best quality.
Things to consider while purchasing steel
Do not preoccupied to check the following things when purchasing steel bars:
Ensure the presence of the BIS certification mark.
Get the specs of the quality of steel.
Purchase from the reputed manufacturers. Also, check for the trademark on every bar.
Ensure that same sized rods are given without any errors.
Remember that a proper storage of steel bars on site is necessary. They must afsluiting kept in shade in dry circumstances to prevent rusting. Ensure that they are not placed outside for more than one month. Wash them with cement slurry if they are exposed so. Clean the bars that are rusted before usage.
It is on your part to ensure that the best mark steel rods are used for grills, windows, reinforcement industrial and others. Remember, any deviations in the specifications of the steel may weaken the structure of your building.